By purchasing this product, you agree to follow these usage instructions.
RECOMMENDATIONS FOR THE OPTIMAL BLEACHING SERVICE:
LIGHTENER
BOLT 9+ LIGHTENER - 1:1.5 - 1:2 (Mix Ratio) - 10,20,30
(MIX RATIO ACTIVATOR) - UP TO 50 MIN. (PROCESSING TIME) - UP TO 9+
LEVELS (LEVELS OF LIFT)
THNDR 7 LIGHTENER - 1:1 - 1:1.5 - 1:2 (Mix Ratio) - 10,20,30,40 (MIX RATIO ACTIVATOR) - UP TO 50 MIN. (PROCESSING TIME) - UP TO 7 LEVELS (LEVELS OF LIFT)
CLAY 7 LIGHTENER - 1:1 (Mix Ratio) - 10,20,30,40 (MIX RATIC ACTIVATOR) - UP TO 50 MIN. (PROCESSING TIME) - UP TO 7 LEVELS (LEVELS OF LIFT)
Instructions
1. Mix Phantom Arts Lightener with Activator in a non-metal bowl. Mixing ratio between 1:1 and 1:2, depending on the chosen bleaching technique. Always stick carefully to the suggested mixing ratios. Mix with a brush to obtain an even cream.
2. Apply bleaching mixture to dry, unwashed hair. Check the lightening result often during application time. For on-scalp applications do not use Activator of concentration higher than 20 Volumes.
3. Once the desired result has been achieved, rinse thoroughly and shampoo to completely remove residues of bleaching mixture Maximum application time: 55 minutes. Do not use under a source of heat.
CAUTION: Handling recommendations for professional hair bleaching products:
• Repeated exposure to washing agents (soaps, shampoos, detergents, etc.) in the workplace can cause impoverishment of the skin natural protective barrier.
• Natural barrier impairment makes the skin more exposed to external agents.
• Under such conditions, a careless use of products may lead to irritations and sensitizations which, with time, could eventually result in more serious health problems.
• It is therefore recommended that the following good working practices are adhered to, when working with bleaching powders:
o Apply protective creams on hands and wear suitable protective gloves while manipulating, applying, and removing the bleaching powder.
o While taking the powder out of its container, do your best to avoid dust lifting; dust inhalation could cause serious irritative reactions to respiratory tract.
o In case of accidental contact with eyes or skin, rinse immediately away with plenty of water.
Do not use metallic tools
It is recommended to aerate workplaces frequently, to promote air exchange and prevent dust and vapours from accumulating in the premises. Moreover, it is necessary to carefully follow directions and safe handling recommendations printed on product label. This is a necessary
c:onrlition for c:01-rP.c:t nrl sfP. 11sP. of thP. nrorh1c:t.